Quayad（启研）Magnetic Separator Rack of PCR 96-well plates(U-bottom/V-bottom)
Cat. QYM91
●Holds:PCR 96-well plates(U-bottom ;V-bottom; flat-bottom) or 0.2ml PCR tubes or 8×0.2ml PCR tubes
●Working volume:20-200μl.
●The magnetic element of this product is composed of 96 annular magnetic columns, each magnetic column adsorbs 1-well independently.
●The magnetic Separator Rack is small in size and easy to operate, which is suitable for effective magnetic bead separation of high-throughput samples.The Rack can take up to 96 samples at the same time.
●Store at ambient temperature,and temperature range that can be subjected to -20-70°C.
●Surface gauss greater than 3800 gs.
Product Description
The Quayad Magnetic Separator Rack of 96-well plates were used to separate samples by magnetic bead method. The magnetic beads can be used to isolate cells, proteins, nucleic acids or other biomolecules. The magnetic beads are mixed with the sample in the proper ratio in a PCR 96-well plate, and usually bind to the target biomolecules within a few minutes. The 96-well plate is placed on the shelf, and the target molecule or cell combined with the magnetic bead can be adsorbed on the tube wall with the magnetic bead under the action of magnetic force. Discard the supernatant and obtain the target molecule or cell captured by the magnetic bead. After repeated adsorption and elution, the target biological samples can be separated and purified. When the magnetic field is removed, the magnetic beads are dispersed and no residual magnetism. These magnets can be used with all types of magnetic beads.
Precautions
These magnets contain very strong permanent magnets. People wearing a pacemaker or any other medical magnetized implant should not use this product unless advised by a health professional; the implant could be affected or damaged by exposure to a strong magnetic field. Keep tools and objects that could be damaged by the magnetic field out of the working area. This includes, but is not restricted to, credit cards and other products containing magnetic recording devices. Keep away from delicate instruments, watches, electronic equipment, displays and monitors. The magnet may attract steel or other magnetic material with high mechanical forces. Take care during handling. Avoid contact between two magnets. Do not pull the magnets apart if contact has been made; twist off to prevent damage to the unit or fingers.
Cleaning and Disinfection
The following materials are recommended for cleaning purposes. Spray and/or wipe the magnetic rack either with 70% alcohol, or 1% sodium hypochlorite solution (bleach). Dry promptly after disinfection. Do not submerge in aqueous solutions and avoid prolonged exposure to water orother organic solvents.
Note: Do not autoclave the magnetic.
Storage and stability
The magnets contain high-energy Neodymium permanent magnets, and the magnetic strength will not diminish significantly during the lifetime of the product. Do not use the magnets above 70°C (122°F) and store in a cool, dry environment. Avoid prolonged exposure of the magnets to direct sunlight or artificial UV light as the surface material may become brittle.
